What is Spod Fishing?
Spod fishing, also known as spodding, is a technique used by carp anglers to precisely deliver bait into a specific spot within the water.
This method of carp fishing is becoming increasingly popular amongst anglers due to its accuracy and the ability to reach areas and deliver lots of bait, quickly.
A spod is a cylindrical rocket-shaped container that is tied to a fishing line and cast out with a spod rod.
The container is filled with bait and then released into the water to deliver the bait accurately in one spot.
When the spod hits the water it releases the bait which then sinks, creating an area of attraction for fish in specific spots.
The use of spods can be beneficial in a variety of different scenarios when carp fishing.
Spods can also be used in conjunction with a marker float to create an accurate baited area of attraction for fish.
This allows them to feed in the bait-filled area and creates a perfect spot for anglers to target with their rigs.
Spod fishing is also beneficial because it can help anglers cover large areas quickly.
They are able to spod around and create multiple spots, allowing them to move around more quickly and increase their chances of catching fish.
Does Spodding scare carp?
Spodding does not scare carp away as they are used to being fed in this manner.
Carp will often congregate around a spot where bait is being delivered, creating the perfect opportunity for an angler to catch them.
If done correctly and with care, spodding can be highly effective and can provide great results.
That being said, it is important to take care when spodding as too much bait in one spot can lead to carp becoming ‘bait shy’ which could potentially have a negative effect on the angler’s catch rate.
To ensure that this does not happen, it is recommended to spread out the bait over a wide area and use smaller amounts in each spot.
This will ensure that the carp do not become too ‘bait shy’ and it will also allow them to feed naturally on the bait without feeling threatened.
Spodding can be a great way to target carp successfully, but it is important to take care when doing so. By following the above advice, anglers can ensure that their spodding sessions are successful and enjoyable.
To get even more out of your spodding trips, always make sure you use quality bait, rods and reels to give yourself the best chance of success!
How do you SPOD properly?
To SPOD properly, it is important to know how far you should cast and how much bait you should use. Firstly, when casting your spod out, make sure that the spot you are aiming for is within your range. The distance that you can accurately cast will depend on the type of rod and reel that you are using.
Next, make sure that you are using the right amount of bait. Too much bait can put carp off and too little will not give them enough to feed on. It is recommended to start off with a small amount and then increase it gradually until you find the optimal amount for your spot.
Lastly, make sure that you cast your spod accurately. If the bait is not delivered directly into your spot, it can be difficult to bring the carp in. To ensure that you cast accurately, use a marker float to mark out the area and then practice casting with a few light casts before sending out the larger amounts of bait.
Can you use any rod for Spodding?
Not all rods are suitable for Spodding.
The ideal rod for spodding needs to be strong and stiff so that it can cast large amounts of bait accurately and further than a conventional carp rod.
This is because the weight of the spod container itself is often too much for an average carp rod to handle.
If you are looking for a rod specifically for spodding, it is best to invest in a heavy-duty spod rod.
These rods have extra strength and power to cope with the weight of the spod container and can cast larger amounts of bait further than standard carp rods.
It is also important to consider how much bait you plan to use.
If you are using large amounts of bait, then it is worth investing in a spod rod with enough power to handle the additional weight.
Finally, when choosing your rod for spodding, look for one that is comfortable and easy to use.
This will make the process of casting easier and more enjoyable.
What makes a good SPOD rod?
A good SPOD rod needs to have the right combination of strength and power to be able to cast large amounts of bait accurately and further.
It should also be comfortable and easy to use, allowing you to cast without any issues.
Additionally, a SPOD rod should be lightweight and durable so that it can withstand the weight of the SPOD container and any additional bait that you may use.
Finally, a good SPOD rod should have a good balance between power and sensitivity so that you can feel the slightest bite and set the hook accurately.
By choosing a rod with these qualities, you will be able to enjoy your spodding trips and increase your chances of catching carp.
Can you use a spod rod for carp fishing?
Yes, you can use a spod rod for carp fishing. A spod rod is designed to be powerful and able to cast large amounts of bait accurately, making it ideal for targeting carp in deeper water.
The extra power from the spod rod also helps when casting heavier baits such as boilies or groundbait.
However, it is important to remember that the spod rod does not replace a traditional carp fishing rod.
A traditional carp rod is more suited for shallow water and offers more sensitivity and control when playing fish.
If you are looking for a versatile rod that you can use for both spodding and carp fishing, then it is worth investing in a two-piece carp rod that can be used for both.
This will give you the best of both worlds and help you catch more carp.
Why you should use a shock leader when spodding?
Using a shock leader when spodding is an important step for any carp angler.
This is because the shock leader helps to protect your mainline from the potential damage caused by heavy weights and coarse materials used in spodding.
The shock leader also serves as an extension of the line, creating extra distance between you and the spod.
Finally, using a shock leader when spodding will also improve your casting accuracy and distance.
This is because the heavier weights used for spodding can sometimes cause problems with line twist.
By using a shock leader, you can reduce the line twist and improve your casting accuracy. So, it is important to always use a shock leader when spodding for carp.
How long should the leader be on a SPOD rod?
When using a SPOD rod, the length of the leader should depend on the weight of the spod container and how far you need to cast.
Generally speaking, it is recommended to use a leader that is at least twice as long as your rod or around 10-15 feet.
This will help protect your mainline from the weight of the spod container and any other materials being used.
It will also give you more distance between you and the spod, allowing for a further cast that is more accurate.
On the other hand, if you are using lighter baits or just casting shorter distances, then a leader length of around 6-10 feet should suffice.
Ultimately, the length of your shock leader will depend on the weight and distance that you need to cast.
Be sure to use a leader that is long enough to protect your mainline, while also allowing you to cast further and more accurately.
How to be accurate when spodding?
Being accurate when spodding is important in order to get the most out of your bait and catch more carp.
The key to spodding accurately is to use a combination of good casting techniques, the right rod and reel setup, and a knowledge of how far you need to cast.
When it comes to casting, try to use a smooth motion and keep your wrist firm as you cast. This will help you maintain accuracy and prevent any line twist from occurring.
Also, make sure that you have the right rod and reel setup for the job. A good SPOD rod should be capable of casting large amounts of bait accurately, while also having enough power to cast heavier weights.
Finally, it is important to know how far you need to cast in order to reach your target. This can vary depending on the lake and conditions, so take the time to practice and get an understanding of the distances that are involved.
How to be safe when spodding
When spodding, safety should always be your top priority. This means following a few simple steps to help protect you, your gear and the environment.
First of all, always wear protective clothing when spodding, such as a finger stall. This will help protect you from any potential hazards that could occur while spodding.
It is also important to pay attention to the surroundings while spodding, looking out for any potential hazards such as power lines or branches.
Finally, be sure to use a shock leader when spodding in order to protect your mainline from any heavy weights. This will help prevent any damage or breakage that could occur.
How to be consistent when spodding
Consistency is key when it comes to spodding for carp.
In order to be consistent with your spods, you need to have a good understanding of the lake and the conditions in which you are fishing.
Take the time to observe things such as fish activity, current and wind direction, as well as water depth. This will help you determine where the carp are likely to be, and how far you need to cast in order to reach them.
It is also important to practice your casting technique regularly in order to improve accuracy and consistency. Practice making long casts with a smooth motion and keep your wrist firm when throwing the spod.
Finally, use the same spod each time you go spodding. This will help you develop a routine in which you can quickly and effectively bait up the lake, helping to ensure that your baiting is consistent every time.
What’s the difference between a Spomb and a SPOD?
A Spomb and a SPOD are both large pieces of fishing tackle used to deploy bait into the water.
The main difference between the two is that a Spomb is capable of dispensing liquid bait as it has a lid that opens when it hits the water, while a SPOD is designed to disperse solid bait such as pellets or particles.
The other major difference is in terms of accuracy. A Spomb is designed to be very precise and can be used to accurately cast liquid bait over large distances. On the other hand, a SPOD is less accurate and more suited to short-distance casts of solid bait.
Finally, both pieces of tackle have their own advantages and disadvantages which should be considered before choosing one or the other. A Spomb is ideal for baiting up quickly and accurately, while a SPOD is perfect for targeting carp in specific areas.
Overall, the decision of which one to use boils down to personal preference and the conditions of the water you are fishing.
What line do you need for Spodding?
When it comes to spodding, using the right line is essential. The type of line you need depends on several factors, including your target species and the size of your bait.
For targeting carp, a good starting point would be a fluorocarbon or monofilament line with a breaking strain between 10-15lb. This type of line is durable and provides good knot strength, making it ideal for spodding.
When using heavier baits or larger weights, a braid with a higher breaking strain such as 20-30lb will be necessary. This type of line is more suited to casting heavier weights and typically has better abrasion resistance.
Overall, it is important to use the right type of line for spodding to ensure your tackle is up to the job. That way you can enjoy a successful session on the water.
Ultimately, spodding is an effective and efficient way to get bait out into the swim quickly and accurately.
What is spodding?
Spodding is a method of bait delivery where large amounts of bait are cast into a swim using a specialised piece of tackle. It can be used for carp fishing in particular but also for other species such as barbel and chub.
What type of line do I need for spodding?
For targeting carp, a fluorocarbon or monofilament line with a breaking strain between 10-15lb is ideal. For heavier baits or larger weights, a braid with a higher breaking strain such as 20-30lb will be necessary.
Is spodding more accurate than other forms of bait delivery?
Yes, spodding is very accurate and can be used to precisely target areas of the swim. It can also be used to quickly deploy large amounts of bait at once, making it an efficient method of bait delivery.
What is the difference between a Spomb and a SPOD?
A Spomb is capable of dispensing liquid bait while a SPOD is designed to disperse solid bait such as pellets or particles. Additionally, a Spomb is more accurate and suited for long-distance casts, while a SPOD is better for short casts of solid bait.
What are the advantages of spodding?
Spodding has various advantages, such as accuracy, quick deployment and being able to spread bait over large areas. It is also very convenient because it can be used for different types of baits and is suitable for a variety of species.
Is spodding easy to do?
Yes, spodding is relatively straightforward and can be mastered with practice. It’s important to use the right tackle for the job, such as a Spomb or SPOD and suitable line, in order to get the best results. With the right gear and technique, you can enjoy successful spodding sessions on the water.
What other forms of bait delivery can I use?
Other methods of bait delivery include pole fishing, free-lining and catapulting. Each method has its own advantages and disadvantages depending on the species you are targeting and the conditions of the water. It is important to consider all your options before choosing which one to use.
What should I do if my spodding gear gets snagged?
If your tackle becomes snagged, the best thing to do is stay calm and try not to panic. Carefully retrieve the line by gently tugging it back and forth until it dislodges from the snag. If this does not work, cut the line as close to the snag as possible and re-tie your tackle.
This will help you avoid losing any tackle or further damaging your line in case of a breakage.
Is spodding expensive?
Spodding can be done on a budget with basic equipment such as a rod, reel, line and either a Spomb or SPOD. Generally speaking, spodding is no more expensive than other forms of bait delivery and can offer great results at a low cost.
What are the disadvantages of spodding?
The main disadvantage of spodding is that it can be difficult to accurately pinpoint your target area if you do not have experience with the technique. Additionally, precision casting can also take some practice in order to get it right. However, these drawbacks can be overcome with time and patience.
What tips should I follow when spodding?
It is important to use the right tackle for the job, such as using heavier lines for heavier baits. Additionally, it is also important to practice precision casting in order to accurately target the swim you are fishing. Finally, make sure to keep a close eye on your tackle when spodding as snags can occur easily. Following these tips will help you get the best results from your spodding sessions.
What other tips should I know?
When choosing a Spomb or SPOD, look for one that has an adjustable flow rate and is made from durable materials. It is also important to check your reel beforehand for line twists and knots, as this can cause problems during casting. If possible, try out different types of bait with your spodding gear before heading out onto the water. Finally, it is important to be mindful of the environment when spodding, as this will help you leave a minimal environmental footprint and ensure sustainable fishing practices for future generations.
What types of baits are best for spodding?
Spodding works best with small particles or pellets that will disperse well over the water. Boilies and groundbaits are suitable choices for targeting larger species such as carp and catfish. Additionally, soft plastics, maggots, and worms can also be used to target smaller species such as bream or roach. It is important to choose the right bait type depending on your target species in order to get the best results from your spodding sessions.
I have made a lot of mistakes during my fishing sessions and don’t want you to make the same mistakes. I’ve learned the hard way over 20 years of fishing most weekends, testing, tweaking, and testing again and now want to help you excel with your carp fishing.
If you need any help, you can reach me at Fishing Again’s Facebook page
Last Updated on February 1, 2024 by Shane